instalasi modem 3.5G HSDPA ZTE MF622 pada ubuntu 9.10 karmic koala

19102009003 22122009183

agar modem ZTE IM2 MF622 dikenali sebagai modem oleh system, maka terlebih dahulu download paket usb_modeswitch-0.9.7.tar.bz2 dari http://www.draisberghof.de/usb_modeswitch/usb_modeswitch-0.9.7.tar.bz2

ekstrak paket tersebut

~/muzakkir/Downloads# tar -jxvf usb_modeswitch-0.9.7.tar.bz2
usb_modeswitch-0.9.7/
usb_modeswitch-0.9.7/usb_modeswitch.c
usb_modeswitch-0.9.7/COPYING
usb_modeswitch-0.9.7/README
usb_modeswitch-0.9.7/usb_modeswitch
usb_modeswitch-0.9.7/Makefile
usb_modeswitch-0.9.7/usb_modeswitch.conf
usb_modeswitch-0.9.7/usb_modeswitch.h

aktifkan direktori usb_modeswitch-0.9.7

~/muzakkir/Downloads# cd usb_modeswitch-0.9.7

Copy file executable “usb_modeswitch” pada directory “/sbin” dan “/usr/sbin”
~/usb_modeswitch-0.9.7# cp usb_modeswitch /sbin/usb_modeswitch
~/usb_modeswitch-0.9.7# cp usb_modeswitch /usr/sbin/usb_modeswitch

copy file usb_modeswitch.conf ke /etc
~/usb_modeswitch-0.9.7# cp usb_modeswitch.conf /etc/usb_modeswitch.conf

edit file 15-zte-mf622.rules
root@muzakkir-laptop:~# nano /etc/udev/rules.d/15-zte-mf622.rules
#————————————————–
ACTION!=”add”, GOTO=”ZTE_End”

# Is this the ZeroCD device?
SUBSYSTEM==”usb”, SYSFS{idProduct}==”2000″,
SYSFS{idVendor}==”19d2″, GOTO=”ZTE_ZeroCD”

# Is this the actual modem?
SUBSYSTEM==”usb”, SYSFS{idProduct}==”0001″,
SYSFS{idVendor}==”19d2″, GOTO=”ZTE_Modem”

LABEL=”ZTE_ZeroCD”
# This is the ZeroCD part of the card, remove
# the usb_storage kernel module so
# it does not get treated like a storage device
#RUN+=”/sbin/rmmod usb_storage”
RUN+=”/usr/sbin/usb_modeswitch -d 1 -v 0x19d2 -p 0x2000 -V 0x19d2 -P 0x0001″

LABEL=”ZTE_Modem”
# This is the Modem part of the card, let’s
# load usbserial with the correct vendor
# and product ID’s so we get our usb serial devices
RUN+=”/sbin/modprobe usbserial vendor=0x19d2 product=0x0001″,
# Make users belonging to the dialout group
# able to use the usb serial devices.
MODE=”660″, GROUP=”dialout”

LABEL=”ZTE_End”
#——————– end —————

pastikan hak akses rules menjadi 644
root@muzakkir-laptop:/etc/udev/rules.d# chmod 644 15-zte-mf622.rules

install paket wvdial
root@muzakkir-laptop:~# apt-get install wvvdial
edit file wvdial.conf
root@muzakkir-laptop:/etc# nano wvdial.conf
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 3600000
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 = AT+CGDCONT=1,”IP”,”indosatm2″
Area Code =
Phone = *99#
Username = username_anda
Password = password_anda
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 0
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1

jalankan wvdial
root@muzakkir-laptop# wvdial
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
–> Sending: AT+CGDCONT=1,”IP”,”indosatm2″
AT+CGDCONT=1,”IP”,”indosatm2″
OK
–> Modem initialized.
–> Sending: ATDT*99#
–> Waiting for carrier.
ATDT*99#
CONNECT
–> Carrier detected. Starting PPP immediately.
–> Starting pppd at Tue Dec 22 18:45:53 2009
–> Pid of pppd: 3227
–> pppd: 0?
–> Using interface ppp0
–> pppd: 0?
–> pppd: 0?
–> pppd: 0?
–> pppd: 0?
–> pppd: 0?
–> pppd: 0?
–> local IP address 114.58.83.236
–> pppd: 0?
–> remote IP address 10.64.64.64
–> pppd: 0?
–> primary DNS address 202.155.0.10
–> pppd: 0?
–> secondary DNS address 202.155.0.15
–> pppd: 0?

kalau anda mendapati tampilan diatas, berarti anda sudah dapat browsing internet.

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: